IN THIS ARTICLE
Lists the qq commands available for Networks and IP addresses in Qumulo Core and their corresponding API action
REQUIREMENTS
- Cluster running Qumulo Core
- Cluster is in quorum and qfsd process is running on the selected node
- The list below reflects the qq commands currently available for networks and IP addresses and can differ between versions of Qumulo Core. Certain commands may require upgrading to a later release to utilize a specific API action.
- Command line (CLI) tools installed via API & Tools in the Web UI
- Admin privileges on the Qumulo cluster
COMMANDS FOR NETWORKS
| COMMAND | ACTION |
qq network_add_network
|
Add network configuration |
qq network_delete_network
|
Delete network configuration |
qq network_get_interface
|
Get configuration for the specified interface |
qq network_get_network
|
Get configuration for the specified network |
qq network_list_connections
|
Get the list of SMB and NFS protocol connections per node |
qq network_list_interfaces
|
List configurations for interfaces on the cluster |
qq network_list_networks
|
List network configurations |
qq network_mod_interface
|
Modify interface configuration |
qq network_mod_network
|
Modify network configuration |
qq network_poll
|
Poll network status |
COMMANDS FOR IP ADDRESSES
| COMMAND | ACTION |
qq dns_get_lookup_overrides
|
List the configured set of DNS lookup overrides. These rules override any lookup results from the configured DNS servers and serve as static mappings between IP address and hostname |
qq dns_resolve_hostnames
|
Resolve hostnames to IP addresses |
qq dns_resolve_ips
|
Resolve IP addresses to hostnames |
qq dns_set_lookup_overrides
|
Replace the configured set of DNS lookup overrides. These rules override any lookup results from the configured DNS servers and serve as static mappings between IP address and hostname |
qq floating_ip_allocation
|
Get cluster-wide floating IP allocation |
qq static_ip_allocation
|
Get cluster-wide static IP allocation |
NOTE: Once you've accessed a node via ssh, you can see the full list of qq commands by running:
qq -h
|
RESOLUTION
You should now be able to successfully use qq commands to complete specific API actions for Networks and IP addresses in Qumulo Core
ADDITIONAL RESOURCES
QQ CLI: Install Command-Line Tools
QQ CLI: Comprehensive list of Commands
Connect Qumulo Core to Multiple Networks
Use IP Failover with Qumulo Core
Like what you see? Share this article with your network!
Comments
0 comments