Qumulo C-Series Drive Diagrams

IN THIS ARTICLE 

Outlines the drive locations in Qumulo C-series platforms

REQUIREMENTS

• Qumulo C-series 72T, 168T, 192T, or 432T platform

DETAILS

Qumulo C-series 1U (72T and 168T)

Drawer HDDs

Drives are ordered from HDD01 to HDD12 moving from the back of the HDD drawer to the front.

Front HDDs

Rear Boot Drive

The boot drive is located in the lower slot on the back of the node. Before removing the boot drive, reach out to care@qumulo.com for additional instructions on how to proceed.

C-Series 2U (192T and 432T)

Drawer Drives

Drawers are labeled in sequence from top to bottom (i.e., the top drawer is number 1).

CAUTION! When the drive drawer is full, it is very heavy. Adding extra weight (such as resting tools on the drawer) could cause the rails to deform.

Drawer 1:

Drawer 2:

Drawer 3:

Rear Drives

Boot Drives

The boot drive is located inside the node's chassis. Before removing the boot drive, reach out to care@qumulo.com for additional instructions on how to proceed.

RESOLUTION 

You should now be able to identify the drive locations in Qumulo C-series platforms

ADDITIONAL RESOURCES

Qumulo C-Series Drive Field Replacement Unit

Qumulo C-Series LED Guide

QQ CLI: Comprehensive List of Commands

Like what you see? Share this article with your network!